How can acrylic be bonded without bubbles?
1, acrylic in the erosion of adhesives will leave traces difficult to remove, therefore, we can use stickers to protect the parts that do not need to stick to;
2, some oil, dust or bubble hole will prevent the adhesive evenly smear and leave bubbles, then you can use the method of cleaning to remove;
3, too little use of adhesive will make the adhesive surface can not be completely coated slowly, or in the adhesive curing shrinkage into the air and affect the appearance;
4. Direct blowing will make the edge of the sticky section white due to the rapid volatilization of the adhesive;
5, indoor humidity, temperature and so on will have a direct impact on the adhesion of acrylic products;
6, acrylic plate surface stress and cutting tool caused by the surface stress and degradation will affect the adhesive effect of acrylic plate;
7, acrylic products with adhesives bonded in not fully cured before, by direct sunlight for a long time will make plexiglass products have different degrees of yellows, will seriously affect the beauty of acrylic products.
Previous：The difference between acrylic and Plexiglass
Next：How to pick out good quality Plexiglass products?